MakerBot (Large) 1.75mm PLA 3D Printing Filament (Cool Grey) MBT01117
SRP :
- Dimensions : 25.0cm (W) - Weight 0.9kg
- Distributor Numbers : Vow Code: MBT01117
- In The Box : 1 x MakerBot (Large) 1.75mm PLA 3D Printing Filament
- Pack Quantity : Total 1 Piece(s)
- Product Type : Printing Filament
 In Stock
MRRP
£62.15
|
Now :
£48.78
£58.54
inc VAT
Pack Quantity 1
|
|
You Save :
6%
|
| MakerBot (Large) 1.75mm PLA 3D Printing Filament (Cool Grey) Every filament colour is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot Desktop software offers. If you're new to 3D printing, MakerBot PLA Filament is a good material to start with because it's easy to use and performs well on most prints. MakerBot PLA Filament adheres well to acrylic and to MakerBot Build Plate Tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts. Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances. Be sure your build plate is level, clean and oil-free before printing.
- PLA Filament
- 1.75mm Filament Diameter
- Large Spool
|
| General | | Marketing | Every filament colour is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot Desktop software offers. If you're new to 3D printing, MakerBot PLA Filament is a good material to start with because it's easy to use and performs well on most prints. MakerBot PLA Filament adheres well to acrylic and to MakerBot Build Plate Tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts. Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances. Be sure your build plate is level, clean and oil-free before printing. | | Description | NOTE: Image for illustration purposes ONLY. | | Barcode | 817913011173 | | Product Type | Printing Filament | | Identifiers | | Distributor Numbers | Vow Code: MBT01117 | | Physical | | Pack Quantity | Total 1 Piece(s) | | In The Box | 1 x MakerBot (Large) 1.75mm PLA 3D Printing Filament | | Dimensions | 25.0cm (W) - Weight 0.9kg |
Thank you for taking the time to share your opinions. This feedback is valuable to customers and helps considerably with purchasing decisions. There will be a short delay before your comments are published. Please feel free to write to us should you wish to share additional product comments.
We seem to be having trouble saving your review. Please try again.
Rate here
Please select a rating
Your name:
Please enter your name
Gender:
Please select your gender
Review:
Please enter a review
|
|
|